GF Machining Solutions is the world’s leading provider of machines, Automation solutions and services to the tool and mold making industry and to manufacturers of precision components. Products range from electric discharge machines and high-speed and high-performance Milling machines - including clamping and palletization systems - to 3D Laser surface texturing machines, services, spare and expendable parts, consumables, and Automation solutions.

Based in Switzerland and maintaining a presence on 50 sites worldwide, GF Machining Solutions is a globally active group and source of strength to its customers. A company belonging to Georg Fischer Group (Switzerland). More information can be found at www.gfms.com.

 

Product Wire Cut EDM

Wire EDM machine uses a metallic wire (electrode) to cut a programmed contour in a workpiece. Extrusion dies and blanking punches are very often machined by wire cutting. In the machining area, each discharge creates a crater in the workpiece (material removal) and an impact on the tool (wear of the tool/electrode). The wire can be inclined, thus making it possible to make parts with taper or with different profiles at the top and bottom. The wire is usually made of brass or stratified copper, and is between 0.02 and 0.33 mm diameter

 
Picture : CUT 2000S

 

Micro Machining

Open up new opportunities for ultra-precise machining of miniaturized components in various fields of technology, including aerospace, defense, medical instruments, semiconductor that may require wire diameters down to 0.02 mm.

 

High Speed Machining

Powerful wire EDM to satisfy demanding high-speed machining with respect of surface integrity. Comply for requirements of complex and large workpieces in die manufacturing, aerospace, medical and other part productions.

 

General Purpose

The AgieCharmilles CUT E 350/AgieCharmilles CUT E 600 range puts efficiency at the touch of your finger with a smart, easy-to-use human-machine interface (HMI) and onboard technologies that streamline your job setup, improve your cutting speed, improve your surface finish, protect your valuable workpieces, and ensure your process robustness.

 

Product Die Sinking  EDM

EDM can be used to machine conductive materials of any hardness (for example steel or titanium) to an accuracy of up to one-thousandth of a millimeter with no mechanical action. By virtue of these properties, EDM is one of the key technologies in mold and tool making. There are two distinct processes — wire-cutting EDM and die-sinking EDM. GF Machining Solutions’ solutions include hole drilling EDM.

GF Machining Solutions is revolutionizing die-sinking EDM with features like FTC — the world’s fastest tool changer — and IQ technology to dramatically reduce electrode wear. All of our die-sinking systems offer fast removal and deliver mirror finishes of Ra 0.05 µm with pulse duration as short as 50 nanoseconds.

Picture : FORM S 350

 

Micro Machining

The AgieCharmilles FORM 1000 is equipped with a fixed table. The work tank and the dielectric level are automatically adjusted to the workpiece height, which allows comfortable access to the work zone for the operator. The machine has a standard granite table which, located at a lower level, offering the advantage of a high distance between table and quill for standard workpieces and electrode dimensions.

 

High Speed Machining

With the GF Machining Solutions die sinker EDM Speed Finishing module the precision of detail is respected and it enables fine and even shiny surface finishes (Ra ≤ 0.4µm) of unmatched homogeneity on small to large surfaces to be obtained.

 

Cost Effective

The FORM 20/FORM 30 die-sinking EDM machines offer success-triggering features and excellent performance. Equipped with GF Machining Solutions’ Swiss-made generator, the FORM 20 / FORM 30 are the market’s ultimate in EDM price/performance.

 

Product Hole Drilling EDM

Hole drilling EDM uses low cost electrode tube (normally brass or copper material) to drill holes on a     electrically conductive material at a very high speed, the hole depth diameter ratio can reach up to 200. The hole diameter is normally from 0.3mm to 3.0mm, with five axis configuration the machine can drill hole at any angles on a inclined surface workpiece. This technology is widely used for hole machinig in aerospace, energy, cutting tools, automotive, medical, mold and die industries.  

 

Picture : DRILL 20

 

 

Product Milling (Mikron)

In modern machining technology, there is an ever-increasing trend towards high levels of availability and greater flexibility. The demand is for even better machining quality, shorter turnaround times and improved, more cost-effective solutions. The future oriented strategy for the standard machines produced by GFMS is based on this development. From the complete range of machines, toolmakers, mold makers and component manufactures can select individual solution in order to gain a competitive edge.

Picture : Mikron MILL S 500

 

High speed machining centers : Mikron HSM

GF Machining Solutions’ range of high-speed milling centers — engineered and built in Switzerland — boast the essential structural design, high-speed spindles, high feed rates, axis mechanism and best-in-class acceleration for machining complex three-dimensional surfaces across a wide range of applications.

High speed milling centers are 10 times faster than conventional milling machines in terms of cutting speed. Greater accuracy and a better surface finish are also achieved. This means that even tempered materials can be machined to a condition where they are largely ready to use.

 

Mikron MILL S Precision

At GF Machining Solutions, we know that precision is not an approximation. From robust product design to the leading edge features aimed at eliminating error and saving you time and energy, our microcomponents fabrication solutions exceed expectations and lay the foundation for repeatable success. The Mikron MILL S Precision series is impressive with the unrivalled accessibility of all machines in the series, regardless of their particular configuration

 

High Performance Machine ( HPM)

Mikron HPM machines are intended for the universal production of high-quality parts with 3, 4 or 5 axes. State-of-the-art motor-spindles, direct drive round and swivelling axes and the solid machine body offer the very best conditions hand in hand with a modern scalable tool magazine system, the well-proven Mikron pallet magazine and suitable cleaning and disposal solution for each chip/coolant situation to achieve precise and economical production requiring minimal amount of space.

Picture : Mikron MILL P 900

 

 

High Efficiency Machine (HEM)

The Mikron HEM 500U with its newly developed rotary tilting table is convincing with competitive performance in terms of rigidity and versatility in its class. It is the ergonomic answer to the standard production of precision parts in prototyping and single parts to small batch series productions.

The Mikron HEM with its newly developed rotary tilting table is convincing with competitive performance in terms of rigidity and versatility in its class. It is the ergonomic answer to the standard production of precision parts in prototyping and single parts to small batch series productions.

Picture : Mikron HEM 700 U

 

 

 

Product Laser Texturing

Laser texturing adds to and extends the technologies offered by GF Machining Solutions. With our laser technology we enable you to produce texturizing, engraving, microstructuring, marking and labeling of 2D geometries right through to complex 3D geometries. GF Machining Solutions' Laser Texturing Technology enables individualization of products and compared to conventional surface treatment using etching processes, offers economic, ecological and design advantages.

Picture : LASER P 1000 U

 

 

Consumables

With Operations Support GF Machining Solutions offers you a wide range of certified consumables and original wear parts, ensuring that your equipment is operating at peak precision and performance.

With these products you create a reliable production environment where all components are specifically designed and chosen to work together. Together with strategic partners we

develope, certify and homologate specific consumables and wear parts.

 

www.gfms.com

 

Our Company

โทรศัพท์ : 66(0) 2295-1000-8,66(0) 2295-1901-8
แฟกซ์ : 66(0) 2295-1009,66(0) 2683-0943,66(0) 2683-0944
ที่อยู่ : 42, 48 ถนน พระราม 3, ซอย 53, ยานนาวา, กรุงเทพ 10120
โทรศัพท์ : 66(0) 3883-2035-8
แฟกซ์ : 66(0) 3883-2044-5
ที่อยู่ : 155 หมู่ 14 ถนน สุขุมวิท, บางปะกง, ฉะเชิงเทรา 24130

Visit Us