Sahamit Machinery PCL was established in 1973 and has grown to be the leading importer and specialists of aluminium alloys. With more than 55,000 sqm of factories and warehousing we stock not only the highest quality product, but also the leading machinery and technologies to meet all demands of our customers.
All your specifications met with leading technology & industry standards.
Aluminium Alloy |
Contact Tel : 02-683-0844 - 49 This email address is being protected from spambots. You need JavaScript enabled to view it. |
• Aluminium & Aluminium Alloy |
1xxx, 2xxx, 3xxx, 4xxx, 5xxx, 6xxx, 7xxx, 8xxx |
• Tempers |
F, O, Hxxx, Txxxx |
Product Specifications |
Product | Thickness (mm) | Width (mm) | Length (mm) |
Plate | 6 - 360 | 1220 - 1500 | 2440 - 2500 |
Sheet | 1.0 - 6 | 1220 - 1500 | 2440 - 2500 |
Hot rolled | 2.2 - 12 | 1480 - 2600 | coil |
Cold rolled | 0.2 - 3.5 | 500 - 2600 | coil |
Bar | 6 - 255 | 1000 - 6000 | |
Note : If you need customized products with other specifications, please contact our sales engineer. |
• Aluminium Bar
• Aluminium Alloy For Aerospace Interior Parts
Aluminum Plate-Alloy |
Temper | Specifications(mm) | ||
Thickness | Width | Length | ||
2014 2017 2024 6061 6082 7075 7075 |
T3,T4 T6,T351 T451,T651 |
0.5-300 | Max. 2600 |
Max. 12000 |
• Other
Aluminum Sheet-Alloy |
Temper | Specifications(mm) | ||
Thickness | Width | Length | ||
1050 1060 1100 3003 3004 3005 3105 5005 5052 5754 5083 |
All Tempers |
0.2-600 | Max. 2600 |
Max. 12000 |
Aluminum Coil-Alloy |
Temper | Specifications(mm) | ID(mm) | |
Thickness | Width | |||
1050 1060 1100 1200 3003 3004 3005 3105 5005 5052 5754 5083 |
All Tempers |
0.15-15 | Max. 2600 |
Max. 12000 |
• Aluminum alloy powder
According to different specifications and models, it is widely used in powder
metallurgy, 3D printing, brazing materials, electronic paste and other processes.
Chemical composition (wt%) | |||||||||
Brand | Si | Fe | Cu | Mn | Mg | Zn | Cr | Ti | Al |
AlSi10Mg | 9.0~11.0 | <0.1 | <0.1 | <0.45 | 0.25~0.45 | <0.1 | - | 0.01 | Bal. |
2024 | 0.50 | 0.50 | 3.8~4.9 | 0.30~0.9 | 1.2~1.8 | 0.25 | 0.10 | 0.15 | Bal. |
4045 | 9.0~11.0 | 0.8 | 0.30 | 0.05 | 0.05 | 0.10 | - | 0.20 | Bal. |
4047 | 11.0~13.0 | 0.8 | 0.30 | 0.15 | 0.10 | 0.20 | - | - | Bal. |
5052 | 0.25 | 0.40 | 0.10 | 0.10 | 2.2~2.8 | 0.10 | 0.15~0.35 | - | Bal. |
5083 | 0.40 | 0.40 | 0.10 | 0.40~1.0 | 4.0~4.9 | 0.25 | 0.05~0.25 | 0.15 | Bal. |
6061 | 0.40~0.8 | 0.7 | 0.15~0.40 | 0.15 | 0.8~1.2 | 0.25 | 0.04~0.35 | 0.15 | Bal. |
6063 | 0.20~0.6 | 0.35 | 0.10 | 0.10 | 0.45~0.9 | 0.10 | 0.10 | 0.10 | Bal. |
7075 | 0.40 | 0.50 | 1.2~2.0 | 0.30 | 2.1~2.9 | 5.1~6.1 | 0.18~0.28 | 0.20 | Bal. |